prevent-wall-dampness-during-monsoon-thehomesinfo

5 Effective Ways to Prevent Wall Dampness During Monsoon

Relatively, all homeowners in India sob about the dampness of walls during the monsoon season. To prevent wall dampness is a deliberate act that can not be overemphasized.  It is the effect of rainy days that brings about this damage. In the process, moisture goes through the exteriors of the house and causes internal damage. Preventing wall dampness requires a lot of attention and knowledge of how it works. 

To this course, dampness results in the peeling of paints and the leakage of the walls. These patches often stay long after the rainy season passes. As a result, it becomes harmful to health because fungus and molds are present. 

Preventing wall dampness is essential and if neglected could lead to something more. If this persists could lead to house structure damage. It is crucial to prevent wall dampness by any means possible.

Read on to see various hacks for preventing wall dampness during monsoon season. 

money-plant-care-thehomesinfo

5 Ways to Prevent wall Dampness During Monsoon Season

It is undisputed that dampness could be a result of bad design or faulty construction.  

To prevent wall dampness means trying out several ways in which it can be prevented. They include:

  • Wall cracks should be checked for and sealed

It is common for walls to crack over time which starts near the door. Sometimes, it could be the door or window frames. The cracks give room for moisture to get into the building structure allowing dampness. One solution to prevent wall dampness is constantly checking for cracks. Cracks are paramount to happening during monsoon season.

It is necessary to check for breaks regularly. Once detected, the prevention of wall dampness must be done through sealing of the cracks. This must be done immediately to avoid further destruction. Once cracks are filled, the plasters must be removed and repainted. It is advisable to do this before the monsoon starts.

  • Surface Treatment

To prevent wall dampness, surface treatment must be done. This consists of filling up the pores of the surface. This is possible with the use of water-repellant metallic soaps. 

To prevent wall dampness, the use of  Calcium and aluminum is very effective. This also includes a bituminous solution, cement coating, etc. 

Economically, preventing wall dampness can be done through the use of cement, lime, and sand. This has served a great purpose in the prevention of walls. 

  • Guniting to prevent wall dampness

This involves putting in layers of rich cement over the cracked surface. To prevent wall dampness, guniting must be carried out. 

Guniting means mixing cement, water, and sand for the effect of closing a surface. It is majorly for sealing cracks, fissures, and areas of leakage. Guniting has been shown in studies to be an effective means of preventing wall dampness. This is carried out by the use of a machine known as a cement gun. 

The machine mixes materials and the hose pipe is used to supply water under pressure. 

The process of preventing wall dampness begins by thoroughly cleaning dirt, dust, and grease. Then the mixture is taken gradually into the machine. Afterward, the machine shoots the mixture at the cracked surface. This is between the pressure of 2 to 3 kg per square by holding the gun at a distance of 75 to 90 cm. 

professional-painting-thehomesinfo

  • Construction of Cavity Walls

A valid example is the teeth. The teeth have different shields that prevent them from danger, and so do walls. To prevent wall dampness, the construction of cavity walls is very necessary. This is because the main wall of the building is shielded with an outer skin wall. This enables a cavity between the two. In the process, the cavity serves a great course in effecting protection. 

This entails covering the building’s exterior wall with a cavity so that the inside wall is protected. The cavity prevents wall dampness and moisture from traveling from the outer to the inner wall.

  • Complete Damp Proofing

This is an upgraded version of surface treatment. The prevention of wall dampness includes adding certain waterproofing compounds to the concrete mix. This increases its authenticity. These compounds are available in either liquid or solid forms. 

Cracks are filled and made waterproof with the use of substances formed from sand. 

The prevention of wall dampness is done by combining concrete and various substances such as alkaline silicates, etc. This is done to make water-resistant concrete capable of aiding solid prevention of wall dampness. 

In conclusion, it is essential to have an idea or a broad knowledge of the prevention of wall dampness. But most importantly, knowing its prevention is the ultimate key.

If there is any mold or fungus on walls as a result of rain, act quickly to remove it. This is because it can lead to respiratory problems. Consult a specialist right away to prevent damp walls if you discover excessive moisture. Rain-induced mold on walls can lead to respiratory issues, so take action now.

Happy Living!

 

Similar Posts